A.    Referred SCI Journal Papers

 

1 W.M. Yan*, H.Y. Li , and David. T.W. Lin, 1999, Mixed convection heat transfer in a radially rotating square duct with radiation effects, Int. J. Heat Mass Transfer, Vol. 42, pp.35-47. (NSC85-2212-E-211-005) SCI , IF:2.315(Engineering, Mechanical=9/125) (5/2,2)

2 David. T.W. Lin and W.M. Yan*, 2000, Experimental study of unsteady thermal convection in heated rotating inclined cylinders, Int. J. Heat Mass Transfer, Vol. 43, pp.3359-3370. (NSC87-2212-E-211-006) SCI , IF:2.315(Engineering, Mechanical=9/125) (4/0,1)

3 W.M. Yan* and David. T.W. Lin, 2001, Natural convection heat and mass transfer in vertical annuli with film evaporation and condensation, Int. J. Heat Mass Transfer., Vol. 44, No. 6, pp.1143-1153. (NSC87-2212-E-211-006) SCI , IF:2.315(Engineering, Mechanical=9/125) (13/1,7)

4 David. T.W. Lin* and C.K. Chen, 2004, A molecular dynamics simulation of TIP4P and Lennard-Jones water in nanochannel, ACTA Mechanica, Vol. 173, pp.181-194. (NSC92-2212-E-006-002) SCI , IF:1.247 (Mechanics = 62/135)(1/1,0)

5 C.K. Chen and David. T.W. Lin*, 2005, TIP4P potential for lid-driven cavity flow, ACTA Mechanica, Vol. 178, pp.223-237. (NSC92-2212-E-006-002) SCI , IF:1.247 (Mechanics = 62/135) (1/0,0)

6 David. T.W. Lin and C.Y. Yang*, 2005, The heat transfer analysis of nanoparticle heat source in Alanine tissue by molecular dynamics, Int. J. Biological Macromolecules, Vol.36, pp.225-231. SCI , IF:2.596 (Biochemistry & Molecular Biology = 163/290)(3/1,2)

7 David. T.W. Lin* and C.Y. Yang, 2007, The estimation of the strength of the heat source in the heat conduction problems, Applied Mathematical Modeling, Vol. 31, pp.2696-2710. SCI , IF:1.706 (Engineering, Multidisciplinary = 11/90)(11/0,8)

8 P. J. Cheng*, David. T.W. Lin, 2007, Surface waves on viscoelastic magnetic fluid film flow down a vertical column, Int. J. Engineering Science, Vol. 45, pp.905-922. (NSC95-2221-E-269-027) SCI , IF:1.691 (Engineering, Multidisciplinary = 12/90)(8/2,7)

9 David. T.W. Lin*, 2007, A study of local effect and global effect on the micro thermal bio-flows by molecular dynamics, Int. J. Biological Macromolecules, Vol. 41, pp.260-265. (NSC95-2221-E-269-025) SCI , IF:2.596 (Biochemistry & Molecular Biology = 163/290) (0/0,0)

10 David. T.W. Lin, W.M. Yan*, H.Y. Li, 2008, Inverse problem of unsteady conjugated forced convection between parallel plate channels, Int. J. Heat Mass Transfer, Vol.51, pp.993-1002. (NSC95-2221-E-269-025) SCI , IF:2.315(Engineering, Mechanical=9/125) (11/0,10)

11 David. T.W. Lin*, H.Y. Li, W.M. Yan, 2008, Estimating the wall heat flux of unsteady conjugated forced convection between two corotating disks using an inverse solution scheme, ASME J. Heat Transfer, Vol. 30, 12, pp.121702-1~8. (NSC95-2221-E-269-025) SCI, IF:1.718(Engineering, Mechanical=20/125)(2/1,2)

12 C.C. Wang*, David. T.W. Lin, H.P. Hu, 2009, Error Analysis of Approximate Solutions of Non-linear Burgers’ Equation, Applied Mathematics and Computation, Vol. 212, pp. 387-395. (NSC96-2221-E-432-002)( SCI, IF:1.349) (Mathematics, Applied=43/247)(1/1,1)

13 C.T. Wang, K.Y. Huang, David. T.W. Lin, W.C. Liao, H.W. Lin, and Y.C. Hu, 2010, A flexible proximity sensor fabricated by fully inkjet printing, Sensors, Vol. 10, pp. 5054-5062, (NSC97-2221-E-211-006) SCI, IF:1.953 (Instruments & Instrumentation=8/57)(11/1,11)

14 N.S. Pai, C.C. Wang*, and David. T.W. Lin, 2010, Bifurcation analysis of a microcantilever in AFM system, J. Franklin Institute and Applied Mathematics, Vol. 347, pp. 1353-1367. (NSC97-2221-E-269-016) SCI, IF:2.418 (Engineering, Multidisciplinary  5/90)(1/0,1)

15 David T.W. Lin, C.C. Wang*, C.Y. Yang, and J.C. Li, 2010, Inverse estimation of temperature boundary conditions with irregular shape of gas tank, Int. J. Heat Mass Transfer, Vol. 53, pp. 4651-4662. SCI, IF:2.315(Engineering, Mechanical=9/125) (3/1,3)

16 P.J. Cheng*, K.C. Liu, and David. T.W. Lin, 2011, Hydromagnetic stability analysis of a film coating flow down a rotating vertical cylinder, Journal of Mechanics, Vol. 27, No. 1, pp. 27-36. (NSC 98-2221-E-269-017) SCI, IF:0.333 ( Mechanics=124/135)(0/0,0)

17 J.C. Hsieh, David T.W. Lin*, and C.H. Cheng, 2011, Optimization of thermal management by the integration of SCGM, finite element method and experiment on the high power LED array, IEEE Transaction on Electron Devices, Vol. 58, No. 4, pp. 1141-1148. SCI , IF:2.062 (Engineering, Electrical & Electronic =44/243)(7/2,7)

18 David. T.W. Lin*, C.N. Huang, and C.C. Chang, 2011, The optimization of the heat removal on the LED package, Advanced Science Letters, Vol. 4, No. 6/7, pp. 2301-2305. (SCI, IF:1.253) (Multidisciplinary Sciences=15/57)(1/1,1)

19 C.N. Huang*, David. T.W. Lin, and C.C. Chang, 2011, Optimal parameter design for permanent-magnet synchronous generators used in the small-scale wind powers, Advanced Science Letters, Vol. 4, No. 4/5, pp. 1607-1610. (SCI , IF:1.253) (Multidisciplinary Sciences=15/57)(1/0,1)

20David T.W. Lin, Y.C. Hu* and H.Y Li, 2011, The study of the heat transfer analysis on the plate-fin heat sinks by the impinging jet flow, Progress in Computational Fluid Dynamics, Vol. 11, Nos. 3/4, pp. 237-245. SCI , IF:0.156(Thermodynamics =54/55)(0/0,0)

21 David T.W. Lin*, C.Y. Yang, J.C. Li, and C.C. Wang, 2011, Dec., Oct., Inverse estimation of unknown heat flux boundary with irregular shape fins, Int. J. Heat Mass Transfer, Vol. 54, pp. 5275-5285. SCI , IF:2.315(Engineering, Mechanical=9/125)(2/0,2)

22 David T.W. Lin*, Yu Chung Hu and C.H. Cheng, 2012, Feb, The optimization of the thermal response on the ZnO pyroelectric film temperature sensor, IEEE Sensors Journal, Vol. 12, No.2, pp.397-403. SCI , IF:1.475 (Instruments & Instrumentation =20/57)(1/1,1)

23 David T.W. Lin, 2012, April, Optimization of the shell-and-tube heat exchanger by simplified conjugated gradient method, Advanced Science Letters, Vol. 9, pp.451-455. (SCI)

24Kuo-Chi Liu*, Po-Jen Cheng, and David T.W. Lin, 2012, April, Effects of the thermal lag ratio on the behavior of bio-heat transfer, Advanced Science Letters, Vol. 9, pp.925-929. (SCI)

25 Xiao-Dong Wang*, Yu-Xian Huang, Chin-Hsiang Cheng, David T.W. Lin, Chung-Hao Kang, 2012, Nov., A three-dimensional numerical modeling of thermoelectric device with consideration of coupling of temperature field and electric potential field, Energy, Vol. 47, pp. 488-497. SCI, IF:3.651 (Thermodynamics =2/55)(7/3,7)

26 David T.W. Lin*, Jui-Ching Hsieh, Nachaya Chindakham, Pham Duy Hai, 2013, Jun., Optimal design of the composite laminate hydrogen storage vessel, Int. J. Energy Research, Vol. 37, pp. 761-768.SCI , IF:1.987 (Nuclear Science & Technology =1/34)(1/0,1)

27 Wan Chun Chuang, David T.W. Lin*, Yuh-Chung Hu, Hsin-Li Lee, C.H. Cheng, Pei-Zen Chang, Ngo Bao Quyen, 2014, Apr., A method integrating optimal algorithm and FEM on CMOS residual stress, J. Mechanics, Vol. 30, No. 2, pp. 123-128. SCI, IF:0.333 ( Mechanics=124/135) (0/0,0)

28Yu-Xian Huang, Xiao-DongWang, Chin-Hsiang Cheng, David T.W. Lin, 2013, Sep., Geometry optimization of thermoelectric coolers using simplified conjugate gradient method, Energy, Vol. 59, pp.689-697. SCI, IF:3.651 (Thermodynamics =2/55) (0/0,0)

29 David T.W. Lin, Chih-Chung Chen, 2013, Oct, The study of the percutaneous laser disc decompression, Advanced Science Letters, Vol. 19, No. 10, pp.2872-2876.

30Jui Ching Hsieh, David T. W. Lin*, and Long Der Shin, 2014, Performance study of heat pipe heat exchanger for ground source heat pump, accepted by Journal of Chinese Society of Mechanical Engineers. (NSC 102-3113-P-024-001)SCI, IF=0.274(Engineering, Mechanical=114/125)

31Jui-Ching Hsieh, David T.W. Lin*, Chin-Hsiang Cheng, Siwapong Kingkaew, Sheng Chung Chen, 2014, The optimal design of the thermal spreading on the high power LEDs, Microelectronics Journal, in press, http://dx.doi.org/10.1016/j.mejo.2014.03.008. (SCI, IF:0.912) (NSC102-2221-E-024-010)

32Jui-Ching Hsieh, David T.W. Lin*, Hsin-Jung Huang, Tzu-Wei Yang, 2014, An experimental study on the compatibility of acetone and aluminum flat plate heat pipe, accepted by Heat and Mass Transfer. (SCI, IF:0.84) (NSC101-2221-E-024-010)

33David T.W. Lin*, C.H. Cheng, 2014, Stress minimization of the pressure vessel by optimal shape design, submitted for Applied Soft Computing. (SCI)

34Jui-Ching Hsieh, David T.W. Lin*, Min-Sheng Suen, 2014, Using genetic algorithm to minimize the stress concentration for electro-thermal micro-actuator, submitted for Microelectronics Journal. (SCI)

35 David T.W. Lin*, Jui-Ching Hsieh, C.H. Wei, 2014, The transport phenomena of supercritical CO2 flow on the reservoir of EGS by Darcy model, submitted for Int. J. Heat Mass Transfer. (SCI) (NSC 102-3113-P-024-001)

36 David T.W. Lin*, Jui-Ching Hsieh, C.H. Wei, 2015, The heat transfer phenomena of supercritical CO2 porous flow based on Darcy model, submitted for Advanced in Mechanical Engineering. (SCI)(NSC 102-3113-P-024-001)

37 P. J. Cheng, David T. W. Lin*, W. M. Liu, Jui-Ching Hsieh and C. C. Wang, 2015, The study of an innovative heat removal model of the aluminum-acetone flat plate heat pipe on high power LEDs, revised by Transactions of the Canadian Society for Mechanical Engineering. (SCIE)( NSC102-2221-E-024-010)

38Bin-hao Chen, Wen-hsiu Tsai,David T.W. Lin, 2015, Impurity effect of copper substrate compounds on graphene growth, submitted for Chemical Physics Letters. (SCI)

39Jui-Ching Hsieh, David T.W. Lin*, Bo-hen Lee, M. C. Chung, 2015, Experimental study of the heat transfer of supercritical carbon dioxide in the long silica-based porous media tube, submitted for Applied Energy. (SCI)

40Jui-Ching Hsieh*, David T.W. Lin, Chia-Li Lin, 2015, Investigation and optimization of thermo-electric conversion for energy harvester based on the vortex vibration induced by vapor flow, submitted for Applied Energy. (SCI)

 

B.     EI & 其他 期刊論文

 

1 P. J. Cheng, David. T.W. Lin, C. Kung, 2008, Hydromagnetic instability of a gravity-driven electrically conductive pseudoplastic liquid film, Journal of Aeronautics, Astronautics and Aviation-A, Vol. 40, No. 2, pp. 73-80.EI

2 謝瑞青、李耀榮、陳榮泰、林大偉2011 July,高功率電子散熱技術發展趨勢, 先進微系統與技術構裝聯盟季刊,Vol.42, pp. 33-44.

3 David. T.W. Lin*, 2011, A molecular dynamics study of the heat transfer phenomena in the bio-tissue, Int. J. Science and Engineering, Vol.1, No. 2, pp. 17-21.

4 David. T.W. Lin*, 2012, The study of molecule list algorithm based on the large momentum molecular system, Int. J. Science and Engineering, Issue 2, pp. 19-24.

5 David. T.W. Lin*, Pham Duy Hai, Chin-Hsiang Cheng, 2012, Optimal design of the composite laminate vessel based on SCGM, Int. J. Science and Engineering, Issue 2, pp. 25-33.

6 Yuh-Chung Hu, David T.W. Lin, Hai-Lin Lee, Pei-Zen Chang, 2013, A solution processed ZnO thin film, Applied Mechanics and Materials, Vol. 239-240, pp. 1585-1588. (EI)

7 Tsung Chi Hsieh, Kuan-Ju Chen, David T. W. Lin*, Yang Der Juang, and Yuh Chung Hu, 2013, The improvement of parameters of manufacturing process on flexible surface acoustic wave device, Applied Mechanics and Materials, Vol. 321-324, pp. 532-535. (EI)

8 Chao-Kuang Chen, David T.W. Lin*, Yung Der Juang Yuh-Chung Hu, Yen Ting Kuo and Chu Yu Chen, 2013, The innovated flexible surface acoustic wave devices on fully inkjet printing technology, Smart Science, Vol.1, pp. 13-17.

9 Jui Ching Hsieh, David T. W. Lin*, Wei-Mon Yan, and Long Der Shin, 2014, The design of heat pipe heat exchanger CO2 EGS, Applied Mechanics and Materials, Vol. 479-480, pp. 284-288. (EI)

10C.N. Huang, K.H. Chen,David T. W. Lin, DEC. 2013, Development of an novel adaptive suspension system based on ball-Screw mechanism, Applied Mechanics and Materials, Vol. 477, pp. 128-131. (EI)

11J. C. Hsieh, David. T. W. Lin, C. H. Wei, and H. J. Huang, 2014, The heat extraction investigation of supercritical carbon dioxide flow in heated porous media, Energy Procedia, Vol. 61, pp. 262-265.  (EI) (NSC 102-3113-P-024-001)

12J. C. Hsieh, B. H. Lee, David. T. W. Lin, and M. C. Chung, 2014, Experimental study of the heat transfer of supercritical carbon dioxide in silica-based porous media, Energy Procedia, Vol. 61, pp. 914-917. (EI) (NSC 102-3113-P-024-001)

13J. C. Hsieh, B. H. Lee, M. C. Chung, David. T. W. Lin, and S. H. Kuo, 2014, Experimental study of heat transfer for supercritical carbon dioxide with upward flow in vertical tube,KMUTNB: International Journal of Applied Science and Technology, Vol. 7, No. 2, pp. 67-71.

14林大偉, 蕭名舜, 謝瑞青, 李伯亨, 郭智惠, 2015, 超臨界CO2在增強型地熱系統儲集層中取熱之研究, 太陽能及新能源學刊, Vol. 14, No. 2, pp. .

15Jui Ching Hsieh, David T. W. Lin*, Wei-Mon Yan, and Long Der Shin, 2015, Design of cooling module of LEDs based on the Aluminum-Acetone flat plate heat pipe, Applied Mechanics and Materials, Vol. 764-765, pp. 244-248. (EI)

 

一、  論文被專書收錄

 

1David. T.W. Lin, H.Y. Li, W.M. Yan, 2008, Inverse problem of unsteady conjugated mixed convection flow between two co-rotating discs, ASME J. Heat Transfer, Vol. 30, 12, pp.121702-1~8, referred by “Convective Heat and Mass Transfer in Rotating Disk Systems” Shevchuk, I.V., 2009, ISBN:978-3-642-00717-0.

 

二、  會議論文

 

1W.M. Yan, H.Y. Li and David. T.W. Lin, 1997, Mixed convection heat transfer in a radially rotating square duct with radiation effects, Proceedings of the 21st National Conference on Theoretical and Applied Mechanics, Taichung, Taiwan, Dec. 20-21, pp.25-34.

2David. T.W. Lin and W.M. Yan, 1998, Experimental study of natural convection heat transfer in heated rotating cylinders, 11th International Symposium on Transport Phenomena (ISTP11), Hsinchu, Taiwan, Nov.29- Dec.3, pp.238-243.

3林大偉,顏維謀,1998,旋轉對傾斜加熱圓柱體內自然對流熱流之影響.中國機械工程學會第十五屆全國學術研討會,台南,台灣,十一月,pp.371-378

4W.M. Yan, H.Y. Li, and David. T.W. Lin, 1999, Radiation effects on mixed convection heat transfer in a square duct rotating about a parallel axis, 1999 National Heat Transfer Conference, Albuquerque, New Mexico, U.S.A., Aug.15-17.

5林大偉,陳朝光,2000,分子動力學於空穴流上之研究,中國機械工程學會第十七屆全國學術研討會,高雄,台灣,十二月,89年。

6林大偉,陳朝光,2001TIP4P分子勢能於平板完全發展流上之研究,中國機械工程學會第十八屆全國學術研討會,台北,台灣,十二月。(NSC90-2212-E-006-002)

7David. T.W. Lin and C.K. Chen, 2003, Molecular plane Poiseuille flow for the TIP4P and Lennard-Jones potentials, 6th ASME-JSME Thermal Engineering Joint Conference, Hawaii, U.S.A., March.16-20. (NSC90-2212-E-006-119)

8林大偉,陳朝光,2004,奈米殼層之放熱過程於蛋白質中之熱傳分析. 中國機械工程學會第二十一屆全國學術研討會,高雄,台灣,十一月。

9 David. T.W. Lin and Y.C. Hu, 2006, A molecular dynamics study of thermal ablation, Proc. of the 1st IEEE Int. Conference NEMS, pp.594-598, Zhuhai, China, January 18-21. SCI-ISTP, EI(NSC94-2212-E-269-017)

10Y.C. Hu, David. T.W. Lin and G.D. Lee, 2006, A closed form solution for the pull-in voltage of the micro bridge with initial stress subjected to electrostatic loads, Proc. of the 1st IEEE Int. Conference NEMS, pp.759-763, Zhuhai, China, January 18-21. SCI-ISTP, EI (NSC94-2212-E-211-006)

11David. T.W. Lin and C.Y. Yang, 2006, Inverse estimation of two-dimensional boundary conditions in bio-heat conduction problems, 17th International Symposium on Transport Phenomena (ISTP17), Toyama, Japan, September 4-8.

12林大偉,王彥杰,朱柏翰,徐銘鴻,黃朝偉,陳翌航,2006,蛋白質流體於具熱邊界奈米流道之流場研究,中國機械工程學會第二十三屆全國學術研討會,台南,台灣,十一月。(NSC94-2212-E-269-017)

13David. T.W. Lin, C.Y. Yang, P.J. Cheng, and K.C. Liu, 2006, An inverse study of boundary conditions in bio-heat conduction problems, 科技與管理學術研討會,台南,台灣,十二月。

14 David. T.W. Lin, 2007, A molecular dynamics on the thermally developing flow of Alanine in nano-channel, Proc. of the 2nd Annual IEEE Int. Conference NEMS, pp.131-135, Bangkok, Thailand, Jan. 16-19. SCI – ISTP, EI(NSC94-2212-E-269-017)

15 Y.C. Hu, C.S. Wei, C.C. Hsiao, and David. T.W. Lin, 2007, Extracting the Young’s modulus and stress gradient of thin films from the pull-in voltage of a micro curled cantilever beam, Proc. of the 2nd Annual IEEE Int. Conference NEMS, pp.278-281, Bangkok, Thailand, Jan. 16-19. SCI – ISTP, EI (NSC95-2221-E-211-008-MY2)

16David. T.W. Lin, W.M. Yan and H.Y. Li, 2007, The estimation of the strength of the heat source in the unsteady conjugated forced convection problem, The Asia Symposium on Computational Heat Transfer and Fluid Flow, Xi’an, China, October 18-21.

17K.C. Liu and David. T.W. Lin, 2007, Thermal response in a perfused tissue with spatial heating, The Asia Symposium on Computational Heat Transfer and Fluid Flow, Xi’an, China, October 18-21.

18】王瑞詠,楊慶煜,林大偉2007分子動力學模擬之新分子表列法則中國機械工程學會第二十四屆全國學術研討會,中壢,台灣,十一月。(NSC95-2221-E-269-025)

19P.J. Cheng, K.C., Liu, and David. T.W. Lin, 2007, “Nonlinear hydromagnetic long-wave instability of a viscoelastic liquid layer flowing down a vertical cylinder,” The 31st National Conference on Theoretical and Applied Mechanics, Kaohsiung, pp. B05_1-8.(NSC 95-2221-E-269-027).

20 David. T. W. Lin, C.Y. Yang, R.Y. Wang and Y.C. Hu, 2008, An improved molecular dynamics algorithm for the larger momentum molecular system, Proc. of the 3rd Annual IEEE Int. Conference NEMS, pp.397-401, Sanya, China, Jan. 6-9.SCI-ISTP, EI (NSC95-2221-E-269-025)

21 C.Y. Yang, David. T.W. Lin, and P.J. Cheng, 2008, A study of bio-heat conduction problems by inverse estimation, Accepted by HEAT 2008, Fifth International Conference on Transport Phenomena In Multiphase Systems, Bialystok, Poland, June 30 - July 3.

22】朱弋鵬,徐銘鴻,林大偉,陳翊航,蔡芳明,2008於高速衝擊噴流下電子元件冷卻之熱傳分析中國機械工程學會第二十五屆全國學術研討會(CSME25),彰化,台灣,十一月。 

23】朱弋鵬,陳翊航,林大偉,徐銘鴻,劉正堯,2008經皮雷射椎間盤減壓術之暫態熱傳分析2008年生物醫學工程年會暨科技研討會(BME2008),林口,台灣,十二月。 

24C.Y. Liu, David. T.W. Lin and K.C. Liu, 2009, The analysis of the thermal structure conjugated problem of the percutaneous laser disc decompression, 20th International Symposium on Transport Phenomena (ISTP20), Victoria, British Columbia, Canada, July 7-10.

25F.M. Tsai, Y-C Hu, I.P. Chu, H.Y. Li and David. T.W. Lin, 2009, The heat transfer analysis of plate-fin heat sinks by high velocity impinging jet flow, The Proceedings of Asia Symposium on Computational Heat Transfer and Fluid Flow (ASCHT09), Vol.3, pp. 304-308, Jeju, Korea, October 20-23. (ISBN: 978-89-961399-4-294550)

26C.Y. Yang, K.C. Liu, I.P. Chu, J.C. Hsieh, David. T.W. Lin and C.H. Cheng, 2009, The temperature optimization of high power LED array, The Proceedings of Asia Symposium on Computational Heat Transfer and Fluid Flow -  (ASCHT09), Vol.3, pp. 309-313, Jeju, Korea, October 20-23. (ISBN: 978-89-961399-4-294550)

27J.C. Li, P.J. Cheng, C.C. Wang, C.Y. Yang and David. T.W. Lin, 2009, Inverse estimation of temperature boundary on the gas tank, The Proceedings of Asia Symposium on Computational Heat Transfer and Fluid Flow (ASCHT09), Vol.3, pp. 299-303, Jeju, Korea, October 20-23. (ISBN: 978-89-961399-4-294550)

28W.C. Huang, I.P. Chu, J.C. Li, C.H. Cheng, David T.W. Lin2009Optimization of the shape design for pressure vessels中國機械工程學會第二十六屆全國學術研討會(CSME26),台南,台灣,十一月。 

29C.Y. Liu, C.H. Cheng, Y.C. Hu, David T.W. Lin2009Optimal design of the shell and tube heat exchanger中國機械工程學會第二十六屆全國學術研討會(CSME26),台南,台灣,十一月。

30Chih-Ping Huang, Jui-Ching Hsieh, Cho-Yu Yang, Ming-Jen Kuo, Chin-Hsiang Cheng, David T.W. Lin2009Optimal design of high power LED array by the integration of SCGM, thermal fluid package and experiment,中國機械工程學會第二十六屆全國學術研討會(CSME26),台南,台灣,十一月。

31C.P. Huang, J.C. Hsieh, C.Y. Yang, C.H. Cheng, and David T.W. Lin, 2009, Using SCGM to optimize high power LED array design by combining experiment and finite element method, The Proceedings of International Conference on Mechatronic System of Integration and Application (ICMS09), pp.1-5, Tainan, Taiwan, Dec 4-5.

32M.J. Kuo, P.J. Cheng, C.Y. Yang, C.H. Cheng, and David T.W. Lin, 2009, The minimum of thermal resistance design of high power LED package, The Proceedings of International Conference on Mechatronic System of Integration and Application (ICMS09), pp.6-9, Tainan, Taiwan, Dec 4-5.

*33J.C. Li, C.C. Wang, C.Y Yang and David T.W. Lin, 2009, An analysis of the high pressure gas tank with inverse method, The Proceedings of International Conference on Mechatronic System of Integration and Application (ICMS09), pp.10-15, Tainan, Taiwan, Dec 4-5.

*34C.Y. Liu, C.H. Cheng, Y.C. Hu and David T.W. Lin, 2009, The optimum model approach of the shell-and-tube heat exchanger, The Proceedings of International Conference on Mechatronic System of Integration and Application (ICMS09), pp.16-20, Tainan, Taiwan, Dec 4-5.

*35C.Y. Yang, K.C. Liu, J.C. Hsieh, David T.W. Lin and C.H. Cheng, 2009, LED location design of high power LED array to the temperature optimization, The Proceedings of International Conference on Mechatronic System of Integration and Application (ICMS09), pp.21-25, Tainan, Taiwan, Dec 4-5.

*36F.M. Tsai, I.P. Chu, H.Y. Li., Y.C. Hu and David T.W. Lin, 2009, A numerical study of jet cooling effect on the pin fin heat sinks, The Proceedings of International Conference on Mechatronic System of Integration and Application (ICMS09), pp.39-43, Tainan, Taiwan, Dec 4-5.

*37W.C. Huang, I.P. Chu, J.C. Li, David T.W. Lin and C.H. Cheng, 2009, Shape design of the pressure vessels under the working pressure based on an optimal approach The Proceedings of International Conference on Mechatronic System of Integration and Application (ICMS09), pp.186-190, Tainan, Taiwan, Dec 4-5..

38H.J. Huang, S.C. Shen, David T.W. Lin and J.C. Hsieh 2009, Experimental study of high power LED array on flat plate heat pipe, The Proceedings of International Conference on Mechatronic System of Integration and Application (ICMS09), pp.60-65, Tainan, Taiwan, Dec 4-5.

39David. T.W. Lin, and M.S. Suen, 2009, The heat transfer analysis of the protein flow on the micro channel by parallel molecular dynamics study and new molecular list algorithm, The Proceedings of International Conference on Mechatronic System of Integration and Application (ICMS09), pp.53-59, Tainan, Taiwan, Dec 4-5.

40J.C. Li, David. T.W. Lin*, C.C. Wang and C.Y. Yang, 2010, An analysis of inverse heat conduction problem on irregular shape fins, Lecture Notes in Engineering and Computer Science, Proceedings of the International Multiconference of the Engineers and Computer Scientists 2010(IMECS), Vol , pp.1858-1862, HongKong, Mar 17-19. (EI)

41W.C. Huang, J.C. Li, K.Y. Huang, David. T.W. Lin*, 2010, An approach based on SCGM for the 3D shape optimization of the spherical vessel with spherical dome, Lecture Notes in Engineering and Computer Science, Proceedings of the International Multiconference of the Engineers and Computer Scientists 2010(IMECS), Vol , pp.1733-1737, HongKong, Mar 17-19. (EI)

42M.S. Suen, David. T.W. Lin*, Y.C. Hu, J.C. Hsieh, 2010, A numerical study of the heat transfer phenomena on ZnO pyroelectric film sensor, Lecture Notes in Engineering and Computer Science, Proceedings of the International Multiconference of the Engineers and Computer Scientists 2010(IMECS), Vol , pp.1770-1773, HongKong, Mar 17-19. (EI)

43 David. T.W. Lin, H.T.X. Chi, C.C. Chang, C.C. Wang, and C.N. Huang, 2010, The optimal design process of the plate heat exchanger, 2010 IEEE International Symposium on Computer, Communication, Control and Automation Proceedings, Vol. 2, pp. 237-240. Tainan, Taiwan, May 5-7. SCI-ISTP, EI (NSC98-2221-E-269-016)

44 Siwapong Kingkaew, Jui-Ching Hsieh, David T.W.Lin*, 2010, “Design and optimization of the LED lamp holder,” The 34th National Conference on Theoretical and Applied Mechanics, Yunlin, Taiwan, Nov 19-20.

45 Nachaya Chindakham, I-Peng Chu, David T.W.Lin*, 2010, “Optimal design of composite pressure vessel by using the genetic algorithm,” The 34th National Conference on Theoretical and Applied Mechanics, Yunlin, Taiwan, Nov 19-20.

46 Wan Chun Chuang, Hsin-Li Lee, David T.W. Lin*, Yuh-Chung Hu, and Pei-Zen Chang, Ngo Bao Quyen, 2010,“Optimal residual stress in CMOS fabrication,” The 34th National Conference on Theoretical and Applied Mechanics, Yunlin, Taiwan, Nov 19-20.

47 C.N. Huang*, David. T.W. Lin, and C.C. Chang, 2010, An intelligent vehicular control based on the gravity-shifting signals, The 3rd International Conference on Power Electronics and Intelligent Transportation System (PEITS 2010), Shenzhen, Nov 20-21. SCI-ISTP, EI

48M. S. Suen, K.C. Liu, J. C. Hsieh, David T. W. Lin, 2011, Optimal design of the electrothermal V-beam microactuator based on GA for stress concentration, Lecture Notes in Engineering and Computer Science, Proceedings of the International Multiconference of the Engineers and Computer Scientists 2011(IMECS), Vol. 2, pp. 1264-1268, HongKong, Mar 17-19. (EI)

49S. Y.  Lin, David T. W. Lin, C. C. Chang, and C. N. Huang, 2011, The heat transfer analysis of the hyperbaric oxygen chamber with cooling system, Lecture Notes in Engineering and Computer Science, Proceedings of the International Multiconference of the Engineers and Computer Scientists 2011(IMECS), Vol. 2, pp. 1255-1259, HongKong, Mar 17-19. (EI)

50陳聖中、李耀榮、林大偉2011主動式微型致冷器之熱流模擬中國機械工程學會第二十八屆全國學術研討會(CSME28),台中,台灣,十二月。

51J.C. Shieh, David. T.W. Lin*, 2011, The stress optimization of the plysilicon optical switch by the genetic algorithm, 3rd International Symposium on Computational Mechanics, 2nd Symposium on Computational Structural Engineering (ISCM III-CSE II ), Taipei, Taiwan, Dec 5-7.

 52S.C. Chen, C.H. Kang, David. T.W. Lin*, W.M. Yan, 2012, Optimization of the micro channel heat sink by combing genetic algorithm with finite element method, The 1st International Conference of Multi Disciplines of Engineering on Advanced Technology and Environmentalism Design (MDEATED 2012), PATTAYA, Thailand, Mar 6-8.

53Cheng Fung Shen, Jui-Ching Hsieh, David T.W. Lin*, Yuh-Chung Hu, 2012, The design and fabrication of the vibration-induced energy harvester on the heat pipe generator, The 1st International Conference of Multi Disciplines of Engineering on Advanced Technology and Environmentalism Design (MDEATED 2012), PATTAYA, Thailand, Mar 6-8.

54Yan-Ting Guo, Yung-Der Juang, David T.W. Lin*, Chu-Yu Chen, 2012, The fabrication of flexible surface acoustic wave devices on fully ink jet technology, The 1st International Conference of Multi Disciplines of Engineering on Advanced Technology and Environmentalism Design (MDEATED 2012), PATTAYA, Thailand, Mar 6-8.

55 Zi-Wei Yang, Jui-Ching Hsieh, David T.W. Lin*, 2012, An experimental study for compatibility of the aluminum-acetone flat plate heat pipe, The 1st International Conference of Multi Disciplines of Engineering on Advanced Technology and Environmentalism Design (MDEATED 2012), PATTAYA, Thailand, Mar 6-8.

56 Cheng-Chi Wang, David T.W. Lin, Her-Terng Yau, 2012, Bifurcation Analysis of Trailing Edge Angle for Aeroelastic System, Computer, Consumer and Control (IS3C), 2012 International Symposium on, pp.440-443, Taichung, Taiwan, June 4-6. (IEEE Xplore)

57 林家立,沈承鋒,謝瑞青,林大偉*, 2012, 壓電型熱管發電機之流場研究, 19th National CFD Conference, Penghu, Taiwan, August 16-18, 2012.

58Yuh-Chung Hu, David T.W. Lin, Hai-Lin Lee and Pei-Zen Chang, 2012, A solution processed ZnO thin film transistor, International Conference on Measurement, Instrumentation and Automation ICMIA2012, Guangzhou, September 15-16, 2012.

59】莊婉君、胡毓忠、林大偉、吳保權、張培仁、李新立、王欽宏,2012CMOS製程相容之樑結構應力模擬分析技術,中國機械工程學會第二十九屆全國學術研討會(CSME29),高雄,台灣,十二月。

60】謝宗錡、郭晏廷、林大偉、莊陽德、陳居毓,2012,氧化鋅薄膜性質在可撓表面聲波元件上之研究,2012中華民國航太學會學術研討會(2012AASRC)pp. 949-954, 新竹,台灣,十二月。

61】戴士翔、康仲豪、陳聖中、林大偉2012,運用基因演算法於微流道散熱器之通道內連結之最佳化設計,2012中華民國航太學會學術研討會(2012AASRC)pp. 265-272, 新竹,台灣,十二月。

62Tsung Chi HsiehKuan-Ju ChenDavid T. W. LinYang Der JuangYuh Chung Hu, 2013, The improvement of parameters of manufacturing process on flexible surface acoustic wave device, 2013 International Conference on Mechatronics and Industrial Informatics (ICMII 2013), Guangzhou, March 13-14.

63 J.L. Lin, J.C. Hsieh, David. T. W. Lin*, 2013, The study of the enhancement of micro-vibration-induced harvester based on vapor impacting, The 8th Annual IEEE Int. Conference on Nano-Engineered and Molecular System, pp.195-198, Suzhou, China, April 7-10.SCI-ISTP, EI (NSC100-2221-E-024-012)

64 C.H. Kang, S.H. Tai, S.C. Chen, David. T. W. Lin*, 2013, Optimization of the ladder-shape micro channel heat sink, The 8th Annual IEEE Int. Conference on Nano-Engineered and Molecular System, pp.389-392, Suzhou, China, April. 7-10.SCI-ISTP, EI

65 L. D. Shin, J. C. Hsieh, David T. W. Lin*, Y. C. Hu, 2013, The heat exchanger of heat pipe study for ground source heat pump, 2013 Conference on Precision Machinery and Manufacturing Technology, Kenting, Taiwan, May 24-26.

66 J.C. Hsieh, David T. W. Lin*, Y. C. Hu, C.N. Huang, W.M. Yan, 2013, The study of the performance of the acetone and aluminum flat plate heat pipe, International Conference on Advance Research in Mechanical, Aeronautical And Civil, Pattaya, Thailand, September 7-8.

67 Jui Ching Hsieh, David T. W. Lin*, Wei-Mon Yan, and Long Der Shin, 2013, The design of heat pipe heat exchanger for CO2 EGS, 2013 International Applied Science and Precision Engineering Conference, Sun Moon Lake, Nantou, Taiwan, Oct 18-22.

68】顏維謀、林大偉、陳文福,2013,於實驗室尺度建置實驗系統及模擬探討CO2-EGS於儲集層之熱流現象,102年能源國家型科技計劃地熱發電主軸計劃成果發表會,臺北,台灣,十一月。

69Chung-Neng Huang, Kuo-Han Chen, David T.W. Lin, 2013, Development of an novel adaptive suspension system based on ball-screw mechanism, International Conference on Applied Mechanics and Materials, Zhuhai, China, November 23-24.

70】謝瑞青、魏啟涵、黃信榮、林大偉*2013,超臨界二氧化碳於多孔介質中取熱之模擬,中國機械工程學會第三十屆全國學術研討會(CSME2013),宜蘭,台灣,十二月。

71】陳斌豪*林大偉、張嘉維、朱弋鵬,2013NaAlH4金屬氫化物之卡匣式儲氫罐之熱傳分析與設計,中國機械工程學會第三十屆全國學術研討會(CSME2013),宜蘭,台灣,十二月。

72】謝瑞青、李伯亨、鍾明哲、林大偉*2013,二氧化碳於微型儲集層之熱流分析,中國機械工程學會第三十屆全國學術研討會(CSME2013),宜蘭,台灣,十二月。

73】蔡其宏、林大偉*、莊陽德,2013,三乙醇胺於氧化鋅薄膜結晶改良之研究,中國機械工程學會第三十屆全國學術研討會(CSME2013),宜蘭,台灣,十二月。

74Bin-Hao Chen, David T.W Lin, Wen-shiou Tsai, 2013Mechanical response of hydrogen-filled single-walled carbon nanotubes under torsion,中國機械工程學會第三十屆全國學術研討會(CSME2013),宜蘭,台灣,十二月。

75 J. C. Hsieh, B. H. Lee, M. C. Chung, S. H. Guo, and David. T. W. Lin, 2014, Experimental study of heat transfer of supercritical carbon dioxide, International Conference on Engineering Science and Innovative Technology, Krabi, Thailand, April 8-10.

76 David T. W. Lin, C. H. Tsai, and Y. D. Juang, 2014, The parametric design of the fabrication on the flexible surface acoustic wave device, International Conference on Engineering Science and Innovative Technology, Krabi, Thailand, April 8-10.

77 J. C. Hsieh, David. T. W. Lin, C. H. Wei, and H. J. Huang, 2014, The heat extraction investigation of supercritical carbon dioxide flow in heated porous media, The 6th International Conference on Applied Energy, Taipei, Taiwan, May 30-Jun 2.

78 J. C. Hsieh, B. H. Lee, David. T. W. Lin, and M. C. Chung, 2014, Experimental study of the heat transfer of supercritical carbon dioxide in silica-based porous media, The 6th International Conference on Applied Energy, Taipei, Taiwan, May 30-Jun 2.

79Y.C. Hu, W.H. Tu, P.Z. Chang, C.K. Lee, David T.W. Lin, and C.N. Huang, 2014, The electromechanical behavior of a micro-beam driven by traveling electrostatic force, Proceedings of the International Multiconference of the Engineers and Computer Scientists 2014(IMECS), HongKong, Mar 12-14. (EI)

80B.H. Chen, W.S. Tsai, and David T.W. Lin, 2014, Impurity influence of graphene growth on Cu ribbon, The 5th Annual Global Congress of Catalysis, QingDao, China, Sep 21-23.

81 David T. W. Lin, P.J. Cheng, L. Z. Huang, C. N. Huang and Y. C. Hu, 2014, The fabrication of flexible double cell split ring resonator based on fully ink jet printing technology, National Symposium on System Science and Engineering, Kinmen, June 21~23.

82 劉悟慢, 林大偉, 鄭博仁, 2014, 應用板式鋁-丙酮熱管之高功率LED散熱模組研究, 21屆計算流體力學研討會, 南投, 八月.

83】袁有朋, 林大偉, 2014, The design of mobile &flexible CO2sensor based on the SAW device, 19屆行動計算研討會, 台南, 826-27.

84P. J. Cheng, David T. W. Lin, C. W. Chang and C. C. Wang, 2014, Design of the cooling module of LEDs based on the aluminum-acetone flat plate heat pipe, The 3rd International Conference on Engineering and Technology Innovation 2014 , Kenting, Oct 31~Nov 4.

85Yi-Shen Chen,Hsin-Yu Tsai,Chin-Hsiang Cheng, Yitung Chen, and David. T. W. Lin, 2014, Parametric analysis of electromagnetic waves shielding of metamaterial structures,The 2nd International Conference of Multi-Disciplines on Advanced Technology and Environmentalism Design 2014 (MDEATED2014), Tainan, Taiwan,Oct 31~Nov 2.

86Po-Jen Cheng, Kuo-Chi Liu, I-Peng Chu, and David T.W. Lin, 2014, Waveevolutiononrollcoatingflowsofthinmacromolecular liquid films,The 2nd International Conference of Multi-Disciplines on Advanced Technology and Environmentalism Design 2014 (MDEATED2014), Tainan, Taiwan,Oct 31~Nov 2.

87Wu-man Liu, David T.W. Lin, C.C. Wang, 2014, The study of the cooling module based on the aluminum-acetone flat plate heat pipe of high power LED,The 2nd International Conference of Multi-Disciplines on Advanced Technology and Environmentalism Design 2014 (MDEATED2014), Tainan, Taiwan,Oct 31~Nov 2.

88You-Peng Yuan, David D.W. Lin, P.J. Cheng, 2014, The design of flexible CO2 sensor based on the SAW device,The 2nd International Conference of Multi-Disciplines on Advanced Technology and Environmentalism Design 2014 (MDEATED2014), Tainan, Taiwan,Oct 31~Nov 2.

89David T.W. Lin, J.C. Hsieh, H.J. Huang and Z.Y. Huang, 2014, Investigation of thermal phenomena in the reservoir of supercritical CO2-EGS base on Brinkman model,The 2nd International Conference of Multi-Disciplines on Advanced Technology and Environmentalism Design 2014 (MDEATED2014), Tainan, Taiwan,Oct 31~Nov 2.

90J.C. Hsieh, David. T. W. Lin, C.H. Wei, H.J. Huang, B.Y. Shin, 2014, Investigation of heat extraction from heated porous media in supercritical CO2-EGS,The 2nd International Conference of Multi-Disciplines on Advanced Technology and Environmentalism Design 2014 (MDEATED2014), Tainan, Taiwan,Oct 31~Nov 2.

91Bin-Hao Chen, Wen-hsiu. Tsai, David T. W. Lin, 2014, Effects of copper substrate impurities on graphene growth,The 2nd International Conference of Multi-Disciplines on Advanced Technology and Environmentalism Design 2014 (MDEATED2014), Tainan, Taiwan,Oct 31~Nov 2.

92J-C Hsieh, B-H Lee, David T.W. Lin, M-C Chung, and W-M Yan, C-J Huang, 2014, Experiment of the porous heat extraction of supercritical CO2,The 2nd International Conference of Multi-Disciplines on Advanced Technology and Environmentalism Design 2014 (MDEATED2014), Tainan, Taiwan,Oct 31~Nov 2.

93David T. W. Lin, J.C. Hsieh, Y.C. Hu, and C.H. Wei, 2014, The thermal phenomena of the supercritical CO2 in the reservoir of theenhanced geothermal system based on Brinkman model,International Congress on Green&Renewable Energy2014 ,Bangkok, Thailand, Nov.19-21.

94David T.W. Lin, J.C. Hsieh, P.J. Cheng, B.H. Lee, C.H. Wei, and M.S. Hsiao, 2014,以Brinkman模型探討超臨界二氧化碳於增強型地熱系統儲集層之熱傳現象,中國機械工程學會第三十一屆全國學術研討會(CSME2014),台中,台灣,十二月。

95Bin-Hao Chen, Wen-Hsiu Tsai and David T. W Lin, 2015, Graphene growth on different industrial copper ribbons by chemical vapor deposition, International Proceeding of Chemical, Biological & Environmental Engineering, vol.82, pp. 25-29. (The 4th International Conference on Informatics, Environment, Energy and Applications (IEEA 2015) ,Pattaya, Thailand, Mar. 28-29).

96Jui-Ching Hsieh, David T.W. Lin, Hsin-Jung Huang and Zih-You Huang, 2015, Heat transfer characteristics of supercritical carbon dioxide in a horizontal tube, International Proceeding of Chemical, Biological & Environmental Engineering, vol.82, pp. 20-24. (The 4th International Conference on Informatics, Environment, Energy and Applications (IEEA 2015) ,Pattaya, Thailand, Mar. 28-29).

97W.M. Liu, David T.W. Lin, Chi-Chang Wang, 2015, Thermal analysis of aluminum-acetone flat plate heat pipe application in heat dissipation of high power LEDs, International Proceeding of Chemical, Biological & Environmental Engineering, vol.82, pp. 42-46. (The 4th International Conference on Informatics, Environment, Energy and Applications (IEEA 2015) ,Pattaya, Thailand, Mar. 28-29).

98David T.W. Lin, You-Peng Yuan and Yuh Chung Hu, 2015, Fabrication of ZnO Thin Film Sensor for CO2 Monitoring, International Proceeding of Chemical, Biological & Environmental Engineering, vol.82, pp. 109-112. (The 4th International Conference on Informatics, Environment, Energy and Applications (IEEA 2015) ,Pattaya, Thailand, Mar. 28-29).

99David T.W. Lin, Jui-Ching Hsieh, Chi-Han Wei, 2015, The heat extraction of SCCO2 in the reservoir of EGS, ASME-ATI-UIT 2015 Conference ,Napoli, Italy, May. 17-20.

100P.J. Cheng, K.C. Liu, David T.W. Lin, 2015, The magnetohydrodynamic field on the surface instability of axisymmetric condensate films at liquid–vapor interfaces, Int. Conference Applied System Innovation ,Osaka, Japan, May. 22-26.

101Cian-Siang Jhong, Yi-Shen Chen, David T. W. Lin*, Chin-Hsiang Cheng, 2015, The fabrication of metamaterials based on the reticle technology, The 5th Int. Conference on OptoFluidics ,Taipei, Taiwan, July. 26-29.

 

三、  技術報告及其他

 

1林大偉2006,奈米殼層之放熱過程於氨基酸中之熱傳分析,國科會報告NSC95-2212-E-269-017

2林大偉2007,鋁製板式熱管之逆運算分析,工研院計畫結案報告。

3林大偉2007,分子動力學於直接甲醇燃料電池之甲醇穿透率模擬,國科會報告NSC95-2221-E-269-025

4林大偉2007藻類特用化學品試量產技術研發計畫-養殖槽熱傳分析人宇生物科技股份有限公司政府補助計畫案

5林大偉2008,直接甲醇燃料電池於甲醇穿透率之動態模擬與實驗,國科會報告NSC96-2221-E-269-007

6林大偉2008,霧化型均熱板之評估分析,工研院計畫結案報告。

7林大偉2009,以平行分子動力學結合新表列法則於三維流道內蛋白質流體之熱流性質分析,98年度台南大學校內計畫結案報告。

8林大偉2010LED陣列之熱傳最佳化設計,99年度台南大學校內計畫結案報告。

9林大偉2011LED燈具散熱最佳化設計99年度學界協助中小企業科技關懷計畫結案報告。

10林大偉2011LED燈具之創新設計-LED燈具之散熱最佳化 99年度台南縣政府SBIR計畫結案報告。

11林大偉2011LED燈具之創新設計-LED燈具之設計介面 99年度台南縣政府SBIR計畫結案報告。

12林大偉2011, 新型可撓式薄膜焦電溫度感測器之校正與最佳化設計,100年度台南大學校內計畫結案報告。

13林大偉2012, 主動式微型致冷器熱流模擬,計畫主持人,工研院計畫結案報告。

14林大偉2012, UV LED均光性光學模擬,計畫主持人,中科院計畫結案報告。

15林大偉2012整合實驗、模擬及最佳化法之壓電型熱管發電機最佳化設計,國科會報告NSC 101-2221-E-024 -010

16林大偉2012清運電動車專利管理地圖,同均企業技術委託案。

 

四、  研究計畫

 

1林大偉,大學生跨領域科技能力培養研究計畫-/奈米光機電跨領域研究計畫,計畫協同主持人,9012月至9312

2林大偉,奈米殼層之放熱過程於氨基酸中之熱傳分析,計畫主持人,948月至957NSC 94-2212-E-269-017

3林大偉,分子動力學於直接甲醇燃料電池之甲醇穿透率模擬,計畫主持人,958月至967月,NSC 95-2212-E-269-025

4林大偉,鋁製板式熱管之逆運算分析,計畫主持人,9511月至963月,工研院計畫。

5林大偉,直接甲醇燃料電池於甲醇穿透率之動態模擬與實驗,計畫主持人,968月至977月,NSC96-2221-E-269-007

6林大偉藻類特用化學品試量產技術研發計畫,計畫顧問,9610月至989月,人宇生物科技股份有限公司,經濟部業界科專計畫。

7林大偉,霧化型均熱板之評估分析,計畫主持人,971月至976月,工研院計畫。

8林大偉高爾夫球桿身脊線測量儀之設計與研發,共同主持人,96年度教育部推動技專校院與產業園區產學合作計畫

9林大偉,以平行分子動力學結合新表列法則於三維流道內蛋白質流體之熱流性質分析,主持人,978月至987月,98年度台南大學校內計畫

10林大偉LED陣列之熱傳最佳化設計,主持人,988月至997月,99年度台南大學校內計畫。(楊倬昱、黃志平)

11林大偉FM1 橋狀結構模型建立技術,協同主持人,988月至997月,工研院98科發計畫分包學界研究計畫。(吳保權)

12林大偉,新型可撓式薄膜焦電溫度感測器之校正與最佳化設計,計畫主持人,998月至1007月,100年度台南大學校內計畫。(孫敏盛、段文心)

13林大偉LED燈具散熱最佳化設計,計畫主持人,997月至9912月,99年度學界協助中小企業科技關懷計畫。(齊瓦朋、陳聖中)

14林大偉LED燈具之創新設計-LED燈具之散熱最佳化,計畫主持人,996月至9911月,99年度台南縣政府SBIR計畫。(齊瓦朋、陳聖中)

15林大偉LED燈具之創新設計-LED燈具之設計介面,計畫主持人,996月至9911月,99年度台南縣政府SBIR計畫。(齊瓦朋、陳聖中)

16林大偉整合實驗、模擬及最佳化法之壓電型熱管發電機最佳化設計,主持人,1008月至1017月,100年度國科會計畫(NSC-100-2221-E-024-012-)(沈承峰、林家立)

17林大偉,主動式微型致冷器熱流模擬,計畫主持人,1007月至1009月,工研院計畫。(陳聖中)

18林大偉UV LED均光性光學模擬,計畫主持人,1007月至1009月,中科院計畫。(陳聖中)

19林大偉,高功率LED之鋁-丙酮板式熱管冷卻模組之研製與最佳化設計,主持人,1018月至1027月,101年度國科會計畫。(NSC 101-2221-E-024 -010 -)(楊子蔚、辛龍德)

20林大偉,電動清運車之專利地圖,主持人,1017月至1019月,同均企業技術委託案。(郭晏廷)

21林大偉CO2在增強型地熱系統取熱之研究,共同主持人,1025月至1034月,國家型科技計劃。(鍾明哲、魏啟涵) (NSC 102-3113-P-024-001)

22林大偉,高功率LED之鋁-丙酮板式熱管冷卻模組之性能分析與耐久測試,主持人,1028月至1037月,102年度國科會計畫。(NSC 102-2221-E-024 -010 -)

23林大偉,鍍膜製程參數最佳化技術,主持人,1039月至10312月,界霖科技技術委託案

24林大偉,超臨界CO2在增強型地熱系統儲集層中取熱之研究(1/2),主持人,1034月至10312月,國家型科技計劃。(MOST 103-3113-M-024-001)

25林大偉,超臨界CO2在增強型地熱系統儲集層中取熱之研究(2/2),主持人,1041月至10412月,國家型科技計劃。(MOST 103-3113-M-024-001)

 

五、  專利

【1】    郭晏廷,林大偉,莊陽德,陳居毓,可撓式表面聲波元件,發明,申請號101130003101817日申請。

【2】    林大偉,謝瑞青,沈承鋒,壓電型微發電裝置,發明,申請號1011419531011122日申請。

【3】    謝瑞青,林大偉,辛龍德,異相熱管發電機,發明,申請中,1025月。

【4】    David T.W. Lin, Jui Ching Hsieh, Cheng Feng Shen, Piezoelectric Micro Power Generator, Invention, Cert. No. I 455473, 2014/10/1-2032/11/8.

【5】    林大偉,袁有朋,郭晏廷,莊陽德,胡毓忠,可撓式二氧化碳感測器,新型,申請中,103918日。

【6】    林大偉,劉悟慢,LED散熱模組,新型,申請中,103918日。

 

六、  學生論文

 

1】王瑞詠,2007,用於大動量系統之分子動力學模擬之新分子表列法則,高雄應用科技大學模具工程所碩士論文(共同指導教授)

2】徐銘鴻,2009,散熱片於衝擊噴流條件下之熱傳特性分析,遠東科技大學機械工程所碩士論文(指導教授)

3】陳翊航,2009,經皮雷射椎間盤減壓術之暫態熱傳分析,遠東科技大學機械工程所碩士論文(指導教授)

4】劉強,2009廠房建築物消防系統細水霧之滅火改善研究國立台南大學高分子材料與製程設備產業研發碩士專班碩士論文(指導教授)

5】蔡芳明,2010,高速衝擊噴流對於散熱片之熱傳分析,國立台南大學機電系統工程研究所碩士論文(指導教授)

6】黃志平,2010整合實驗 簡易共軛梯度法及多重物理量分析之高功率LED 陣列熱傳最佳化研究國立台南大學機電系統工程研究所碩士論文(指導教授)

7】郭銘仁,2010高功率發光二極體封裝之熱傳研究暨視窗介面開發國立台南大學機電系統工程研究所碩士論文(指導教授)

8】劉正堯,2010殼管式熱交換器之熱傳最佳化設計國立台南大學機電系統工程研究所碩士論文(指導教授)

9】李仁傑,2010運用循次法分析逆向熱傳導問題,國立台南大學機電系統工程研究所碩士論文(指導教授)

10】楊倬昱,2010,高功率LED陣列之熱傳最佳化設計,國立台南大學機電系統工程研究所碩士論文(指導教授)

11】黃文治,2010,壓力容器之外形最佳化設計,國立台南大學機電系統工程研究所碩士論文(指導教授)

12Ha Thi Xuan Chi2010The Optimal design process of the plate heat exchanger,國立台南大學機電系統工程研究所碩士論文(共同指導教授)

13Ngo Bao Quyen2011Optimal residual stress in the CMOS fabrication,國立台南大學機電系統工程研究所精密工業產業研發碩士外國學生專班碩士論文(指導教授)

14Doan Van Tan2011The study of the thermal effect on the ZnO pyroelectric film temperature sensor,國立台南大學機電系統工程研究所精密工業產業研發碩士外國學生專班碩士論文(指導教授)

15Pham Duy Hai2011Optimal design composite pressure vessel with liner base on SCGM,國立台南大學機電系統工程研究所精密工業產業研發碩士外國學生專班碩士論文(指導教授)

16】孫敏勝,2011,運用基因演算法進行多晶矽光開關之應力最佳化設計,國立台南大學機電系統工程研究所碩士論文(指導教授)

17Nachaya Chindakham2011Optimal design of composite pressure vessel by using genetic algorithm,國立台南大學機電系統工程研究所碩士論文(指導教授)

18Siwapong Kingkaew2011Design and optimization of a LED lamp holder using a simplified conjugate gradient method and genetic algorithm,國立台南大學機電系統工程研究所碩士論文(指導教授)

19】林詩韻,2011,冷卻系統於高壓氧艙之熱傳最佳化設計,國立台南大學機電系統工程研究所碩士論文(共同指導教授)

20】沈承鋒,2012Experiment on the generated power of PVDF by impinging vapor flow,國立台南大學機電系統工程研究所碩士論文(指導教授)

21】陳聖中,2012Optimization design of the micro channel heat sink by genetic algorithm and interval genetic algorithm,國立台南大學機電系統工程研究所碩士論文(指導教授)

22】楊子蔚,2012Study on generated non-condensable gas of flat plate heat pipe and improved performance,國立台南大學機電系統工程研究所碩士論文(指導教授)

23】郭晏廷,2012The fabrication of flexible surface acoustic wave devices based on fully ink jet technology,國立台南大學機電系統工程研究所碩士論文(指導教授)

24】蘇銘雄,2013遠紅外線對於冷凍冷藏之節能防腐效益評估,國立台南大學機電系統工程研究所產碩專班碩士論文(指導教授)

25】謝宗錡,2013,可撓表面聲波元件於製程參數之改良,國立台南大學機電系統工程研究所碩士論文(指導教授)

26】潘家德,2013,熱管散熱器之熱管陣列配置設計,國立台南大學機電系統工程研究所產碩專班碩士論文(指導教授)

27】林家立,2013,運用蒸汽衝擊共振獵能裝置之研究,國立台南大學機電系統工程研究所碩士論文(指導教授)

28】辛龍德,2013,熱管熱交換器應用於地源熱泵之研究,國立台南大學機電系統工程研究所碩士論文(指導教授)

29】戴士翔,2013,梯狀結構微流道散熱器散熱分析及最佳化設計,國立台南大學機電系統工程研究所碩士論文(指導教授)

30】潘春花,2014,養殖池壓力式排放口控制因子之研究,國立台南大學機電系統工程研究所碩士論文(指導教授)

31】李天佑,2014,節能垃圾車之創新設計與專利佈局,國立台南大學機電系統工程研究所產碩專班碩士論文(指導教授)

32】陳淑敏,2014,付費式垃圾桶之創新設計,國立台南大學機電系統工程研究所產碩專班碩士論文(指導教授)

33】李佳芬,2014,遠紅外線裝置對柴油引擎的燃油及廢氣效率評估,國立台南大學機電系統工程研究所產碩專班碩士論文(指導教授)

34】張嘉維,2014,利用鋁丙酮板式熱管散熱之LED模組設計,國立台南大學機電系統工程研究所碩士論文(指導教授)

35】黃麗慈,2014,以全噴墨印表技術製造與設計諧振環超材料之研究,國立台南大學機電系統工程研究所碩士論文(指導教授)

36】蔡其宏,2014,可撓表面聲波元件製程的參數設計,國立台南大學機電系統工程研究所碩士論文(指導教授)

37】魏啟涵,2014,超臨界二氧化碳於增強型地熱系統儲集層取熱之模擬,國立台南大學機電系統工程研究所碩士論文(指導教授)

38】鍾明哲,2014,超臨界CO2 於多孔介質流動之取熱實驗探討增強型地熱系統之熱傳現象,國立台南大學機電系統工程研究所碩士論文(指導教授)